• Finished Leather Cleaner

Warning: Not for use on nubuck or suede. Use on finished leather only! Keep out of reach of children. Do no swallow. In case of contact with eyes, rinse well with water. Refer to MSDS for full safety info.

Directions: Pre-test cleaner in hidden are to assure satisfactory results. Clean an entire section at one time by applying cleaner to pad or cloth and rub in a circular motion with moderate pressure. Wipe dry with clean cloth. Continue until all sections are cleaned. Allow leather to air dry. Do not apply heat. Repeat for heavily soiled areas. 

  • Finished Leather Cleaning Wipes

Warning: For use on Finished Leathers only.  Pre-test wipe in a hidden area to ensure satisfactory results.  Keep out of reach of children.  Avoid contact with eyes.  If contact occurs, rinse thoroughly and seek medical attention.  Do not ingest.  Refer to MSDS for full safety info.

Directions: Pre-test wipe in a hidden area to ensure satisfactory results. Clean an entire section at one time by using wipe to clean leather in a circular motion with moderate pressure.  Continue until all sections are cleaned.  Wipe dry using a new clean towel.  Do not apply heat.  Repeat for heavily soiled areas. 

  • Conditioner, Protector

Warning: Not for use on nubuck or suede. Use on finished leather only! Keep out of reach of children. Do no swallow. In case of contact with eyes, rinse well with water. Maybe used on Anilines and finished leathers. Aniline leathers may dry to a minimally darker hue. Refer to MSDS for full safety info.

Directions: Pre-test product on a hidden area to ensure satisfactory results. Conditioner is applied to a clean cloth and then to the surface of the leather in circular motions with minimal pressure. An entire area (arm,seat, etc.) completed at one time. Leave product to dry on its own. Aniline leathers willdarken initially and will return to a slightly darker hue when dry.

  • Ink and Stain Remover Stick

Warnings: Keep out of reach of children.  Avoid contact with eyes.  If contact occurs, rinse thoroughly and seek medical attention.  Do not ingest.  Refer to MSDS for full safety info.

Directions: Pre-test in a hidden area to ensure satisfactory results - do not proceed if leather color transfers to stick.  Coat stained area by rubbing end of the stick directly on leather surface.  As stain dissolves, wipe off stick with a clean, white cotton cloth.  Use non-linting damp cloth to remove excess, repeat if necessary.  After stain is removed, clean off residue with Finished Leather Cleaner.  Do not apply heat.  Air dry away from direct heat.  

  • Multi-Clean Cleaner

Warning: Keep out of reach of children.  Avoid contact with eyes.  If contact occurs, rinse thoroughly and seek medical attention.  Do not ingest.  Refer to MSDS for full safety info. 

Directions: Test in an inconspicuous area to ensure satisfactory results.  Clean the entire area at one time by applying MultiClean to a white cotton cloth.  Use circular motion and moderate pressure to wipe the area that is soiled.  Continue until all sections are completely cleaned.  Wipe with a dry Microfiber Mitt to remove any residue.  Repeat for heavily soiled areas.  

  • Microfiber Mitt

Warning:  Like most synthetic fibers, microfiber will melt when exposed to heat. Do not use this as an oven mitt. Do not use Microfiber Mitt with alcohol. 

Directions: Simply slide your hand inside the Microfiber Mitt and begin dusting.  The Mitt can be used dry or dampened with water.  When the Mitt is covered with dust and dirt, it can be machine washed with other microfiber items, or rinsed off.  It can be machine or air-dried. 

  • Nubuck Cleaning Pad

Warning: Keep out of reach of children

Directions: Gently buff the surface of the leather with the finer (white) side to remove surface contamination.  If a stain remains after buffing, buff with the coarser side followed by the finer side (to ensure that the nap remains the same).  Do entire area at one time.  *On ultra suede only, if stain persists, use the Finished Leather Cleaner foam in combination with the finer side of the pad to help alleviate the issue. 

For technical support, please call: 732-530-3220